Blog RSS

All of the documentation you will need to build your Sputnik Race Drone Kit! Depending on your present comprehension of building a quad-copter you can watch our build video, read the how-to, or do both! For those of you who have never done something quite like this, we would recommend both.Let's get started! First let's take a look at the included parts and get a feel for some terms we're going to use; In your kit you will find; Frame Kit 4 X 3.5mm Thick Arms 4 X 1.5mm Thick Arm Supports 1 X 1.5mm Base Plate 1 X 2mm...

Read more

We've got Lots of exciting things in the works guys! A new kit with a special frame in the prototype phase, a new "Stretched X" frame being designed, and new Crash Proof Straps! Read On!At events and through other sources we have received a lot of questions about Buying a drone. Sure some of you know you don't really buy a racing drone, but we decided it's time for a DIY kit for those that are willing to build but don't know what to buy.The kit will be centered around a flagship H frame. Yes X is all the rage,...

Read more

When choosing a frame, likely the most considered factor is Motor Placement; Where the motors are on the frame in relation to each other.There are those that place a lot of weight in motor placement, and there are those who look to other factors first. The purpose of this post is to go over as many placements and their purposes as possible. Feel free to skip to the most relevant part as it suits you. Let's start with X.X was the original quad-copter design, before FPV was so much as popular. It's purpose at the time being that having the...

Read more

Drones are a popular subject in all walks of life, but many people land on drones for different reasons without realizing just how broad the subject is.My first experience with drones were small racing drones, when the ZMR 250 was still a popular H quad. I had of course heard of drones in other scenarios, but had no idea how similar the base qualities were. Our team pilot, for example, spends most of his days working with very large drones for much more commercial purposes. His drones consist of 1000mm hexacopters that carry expensive equipment to do things like make...

Read more

The Mach5 has been available for some time now, but some of you that have built it have noticed that not all of it's ingenuity is particularly obvious. So I made a short video to describe how the Mach5 was designed to be built. Please note, the nipple on the frame indicates the Front.

Read more